How to Pair Cedar Pendant with Your Dining Table

Quick answer

Hang the Cedar pendant 30 to 36 inches above your dining table surface, centered over the table, and choose a size that leaves at least 12 inches of clearance on each side.

How to hang the Cedar pendant over your dining table

1. Measure the table width: Measure your dining table width. The Cedar pendant should be no wider than two-thirds of that width. For a 48-inch table, the pendant fits well; for a 60-inch table, plan to use two pendants spaced 30 inches apart. Common mistake: choosing a single pendant for a table wider than 54 inches, which makes the light feel undersized.
2. Set the hanging height: Hang the bottom of the Cedar pendant 30 to 36 inches above the tabletop. For ceilings higher than 8 feet, add 3 inches per extra foot of ceiling height. Use a dimmer to adjust brightness for different occasions. Checkpoint: if the pendant is above eye level when seated, it is too high. Lower it until you can see across the table without glare.
3. Center over the table: Position the pendant directly over the center of the table, not the room. If using two pendants, center each over the midpoint of its half of the table. Use a laser level or string to verify alignment. Common mistake: centering the pendant on the room’s ceiling fixture box instead of the table, which creates an off-center look.
4. Choose the right bulb and dimmer: Use a warm white LED bulb (2700K to 3000K) to match the wooden finish. Install a dimmer switch to transition from bright task lighting for meals to a softer glow for entertaining. Checkpoint: confirm the bulb is compatible with your dimmer to avoid flickering or buzzing.

Product facts

• Cedar: Cedar pairs a warm ambient glow with the functionality of a modern side table. Its dual purpose means it lights the dining surface while also acting as a visual anchor, reducing the need for extra decor on the table.