How to Style the Angelica Sconce in Bathrooms and Hallways

Quick answer

Mount the Angelica Sconce at eye level (around 60–66 inches from the floor) in hallways, and flank bathroom mirrors at roughly 64–68 inches on center. Keep it 3–4 inches from the mirror edge, and use a dimmer to soften its brushed gold glow. The solid brass build suits damp areas, but always check your local electrical code for bathroom zone restrictions.

Why the Angelica Sconce works in both rooms

The Angelica Sconce is made from solid brass with a brushed gold finish, so it resists tarnish better than plated metals in humid bathrooms. Its clean, unshaded profile throws light both up and down, which is useful for hallway wayfinding and for bathroom task lighting. Because it is a hardwired fixture, plan your placement before drywall goes up or hire an electrician if you are retrofitting.

Bathroom placement: mirror height and spacing

For a single sconce above a mirror, center it 66–72 inches from the floor. For a pair flanking a mirror, set each fixture 64–68 inches on center and 3–4 inches from the mirror edge. If your mirror is wider than 36 inches, use two sconces rather than one to avoid shadows on the sides of your face. A common mistake is mounting too high, which casts shadows downward; test with painter's tape before wiring.

Hallway placement: rhythm and repetition

In hallways, space sconces 6–8 feet apart along the wall, measuring from the center of each fixture. Keep them at least 6 inches from door trim so the light does not get blocked when doors open. If your hallway is narrow (under 4 feet wide), use one sconce per wall section to avoid a cramped look. The most common error is placing them too low, which makes the hallway feel like a tunnel; 60–66 inches is the sweet spot.

Styling with other finishes and fixtures

The brushed gold finish pairs well with matte black hardware, warm wood tones, and marble. In bathrooms, repeat the gold in faucets or cabinet pulls to make the sconce look intentional. In hallways, consider a slim console table beneath the sconce and a mirror opposite to bounce light. Avoid mixing more than two metal finishes in one sightline; it reads as cluttered rather than collected.

Step-by-step Angelica Sconce styling

1. 1. Measure and mark height: Use painter's tape to mark 60–66 inches for hallways or 64–68 inches for bathroom mirrors. Stand back and check the height against your eye line. Checkpoint: the light should hit your face, not the top of your head.
2. 2. Check spacing and symmetry: For pairs, measure 3–4 inches from the mirror edge and ensure both sconces are level. In hallways, keep 6–8 feet between fixtures. Mistake to avoid: uneven spacing that makes the hallway feel off-balance.
3. 3. Plan the electrical and dimming: Confirm a junction box is available or hire an electrician. Add a dimmer rated for LED if you want soft ambient light in the evening. Checkpoint: test the dimmer before final mounting to avoid flicker.
4. 4. Style around the sconce: Add a mirror opposite in hallways, or a small tray with a candle in bathrooms. Keep decor below the sconce to avoid blocking light. Next step: repeat the brushed gold in one other hardware piece for cohesion.

Product facts

• Angelica Sconce: Made from solid brass with a luxury brushed gold finish. Solid brass resists corrosion in bathroom humidity better than plated steel, and the gold finish adds warmth to cool-toned tiles.